Soundbar with Subwoofer (ParkSite MCR – Majority Sierra Plus)

(Model: Majority Sierra Plus – Soundbar with Subwoofer 1000002682)

Full user manual here.

BEFORE CONNECTING YOUR DEVICE, MAKE SURE THE SUBWOOFER (black box bass on floor is connected) IS CONNECTED TO THE SOUNDBAR for full sound effect. Instructions as follows:

  • Turn on both soundbar and subwoofer on at the same time (just connect both plugs to the mains or extension lead).
  • This should connect the two together, if this does not work, first try and turn both devices off then on.
  • If this does not work, when both devices are powered on, the subwoofer blue indicator light should flash slowly.
    • Short press the subwoofer PAIR button switch. When the soundbar is paired with the subwoofer, the subwoofer blue indicator light will remain stable and on.
    • If the Subwoofer light is red, it is not connected and repeat steps above – making sure any Bluetooth devices connected to the soundbar are disconnected.

CONNECTING TO THE SOUNDBAR via BLUETOOTH CONNECTION

  1. Turn on the sound bar and short-press the input button repeatedly on the soundbar or INPUT button on the remote control to switch the sound bar to Bluetooth mode – the LED will display bLUE on the soundbar and will flicker if in the Bluetooth pairing mode.
  2. On your own device, switch on Bluetooth and search for and select Majority Sierra Plus on your Bluetooth list to start connection – if prompted for a password, use “0000”.
  3. Wait until you hear the voice prompt from the Soundbar. If the successfully connected, bLUE stops flickering and is displayed on the display panel.

THE REMOTE CONTROL SHOULD BE STUCK BESIDE THIS DOCUMENT ON THE WALL

IF YOU USE, IT PLEASE PUT IT BACK SO OTHER CAN USE IT IN THE FUTURE. Please! Thank you.